Synthetic Diamond Abrasives
We specialize in all different types of coatings for our synthetic diamond powders — including titanium, nickel and copper coating.
Filter products by
DID 18
Diamond grit for extremely high demands. Blocky, very uniformly cubo-octahedral shaped diamond crystals with extremely high toughness & thermal stability.
Applications
Sawing, Drilling / Mining, Dressing, Cutting
For Diamond Tools: stepped segments for large circular saws, segments for circular saws, drill bits, milling tools, dressing tools.
Sizes
US mesh: 25/30 - 60/70
FEPA: D711 - D251
Work-piece Materials
Granite, Sandstone, Marble, Concrete, Refractories, Asphalt
DID 16
Diamond grit for high demands. Blocky, uniformly cubo-octahedral shaped diamond crystals with very high toughness & thermal stability.
Applications
Sawing, Dressing, Cutting
Stepped segments for large circular saws, segments for circular saws & frame saws, drill bits, milling tools, wire saw beads, band saws, dressing tools.
Sizes
US mesh: 25/30 - 60/70
FEPA: D711 - D251
Work-piece Materials
Granite, Sandstone, Marble, Limestone, Concrete, Asphalt, Refractories, Ceramics, Glass
DID 14
Diamond grit for standard demands. Blocky, mainly uniformly cubo-octahedral shaped diamond crystals with high toughness & thermal stability.
Applications
Sawing, Dressing, Cutting, Electroplating
Segments for circular saws & frame saws, drilling tools, wire saw beads, electroplated tools.
Sizes
US mesh: 25/30 - 60/70
FEPA: D711 - D251
Work-piece Materials
Different kinds of Medium & Soft Stone, Marble, Travertine, Limestone, Slate, Ceramics, Glass & Silicon
DID 12
Diamond grit for standard demands. Blocky diamond grit, sharp-edged grains with rough fracture surfaces & original crystal surfaces.
Applications
Sawing, Dressing, Cutting, Electroplating
Electroplated tools, wire saw beads, free-cutting tools.
Sizes
US mesh: 25/30 - 60/70
FEPA: D711 - D251
Work-piece Materials
Soft stone, Ceramics, Glass, Fiberglass, Reinforced Plastics
DID 9
An excellent combination of reasonably tough diamond & friable diamond particles, with good whole shapes & cubo-octahedral crystals. The impact strength is good for moderate & medium applications.
Applications
Sawing, Dressing, Grinding, Cutting, Electroplating
Highly recommended for Electroplating applications.
Sizes
US mesh: 25/30 - 60/70
FEPA: D711 - D251
Work-piece Materials
Stone, Concrete
DID 1
Designed to be used for very light applications mainly suitable where tool life is not important. However cutting ability is excellent due to broader distribution of shapes.
Applications
Sawing, Dressing, Grinding, Cutting, Electroplating
Highly recommended for electroplating applications & small, 4-inch cutting blades, for stone & concrete. Also recommended as an additive where high diamond concentration is required.
Sizes
US mesh: 25/30 - 60/70
FEPA: D711 - D251
Work-piece Materials
Stone, Concrete
DEV MB 6200 +
Is a premium synthetic diamond for use in metal bond applications. The crystals are blocky & uniformly cubo-octahedral in shape with high impact. Their increased thermal stability & toughness extends the life of the tool & are recommended where high material removal rates are required.
Applications
Grinding, Cutting, Lapping / Polishing, Electroplating
Glass: core-drilling, pencil-edging, Granite & Marble: trimming, polishing, Crystal & Glass: grooving, grinding
Sizes
US mesh: 60/70 - 325/400
FEPA: D251 - D46
Work-piece Materials
Glass, Granite, Marble, Crystal
DEV MB 6200 ++
Finest quality of synthetic diamond for use in metal bond applications. The crystals are well defined cubo-octahedral in shape with lowest levels of internal impurities. Their superior strength & thermal stability enables them to be used where material removal rates are most severe.
Applications
Drilling / Mining, Grinding, Cutting, Lapping / Polishing, Electroplating
Granite & Marble: polishing, Granite & Ceramic Tile: sawing, enhanced pencil-edging, Tungsten Carbide button grinding.
Sizes
US mesh: 60/70 - 325/400
FEPA: D251 - D46
Work-piece Materials
Glass, Granite, Marble, Ceramic Tiles, Crystal
DEV MB 6200
Is an uncoated Synthetic Diamond for use in metal bond applications. The crystals of this material are more blocky than Dev RS6100, but is still designed to give good bond retention & optimum performance.
Applications
Grinding, Cutting, Lapping / Polishing, Electroplating
Glass: edging & beveling, Granite, Marble & Limestone: trimming, polishing, Tungsten Carbide & Cast Iron: grinding
Sizes
US mesh: 60/70 - 325/400
FEPA: D251 - D46
Work-piece Materials
Glass, Granite, Marble, Limestone, Cast-iron
DEV MB 6200 I
Highly recommended for applications where grinding forces are low per crystal. Due to the semi-blocky shape, it provides more free cutting & grinding action, and is recommended for low material removal grinding applications.
Applications
Grinding, Cutting, Lapping / Polishing, Electroplating
Glass: seaming, edging & bevel-polishing, Granite, Marble & Limestone: polishing, Ceramic: dental burrs & cut-off wheels
Sizes
US mesh: 60/70 - 325/400
FEPA: D251 - D46
Work-piece Materials
Glass, Granite, Marble, Limestone, Dental Ceramics, Cast-iron
DEV MB 6200 II
Friable, synthetic diamond, recommended for applications where grinding forces are very low. Due to the angular shape of the diamond, it helps to regenerate sharp cutting edges faster. It provides more free cutting & grinding action, and is recommended for low material removing grinding applications.
Applications
Grinding, Cutting, Lapping / Polishing, Electroplating
Glass: bevel polishing, Granite & Marble: polishing, Ceramic: dental burrs & cut-off wheels, finishing & polishing. Highly recommended for electroplating applications
Sizes
US mesh: 60/70 - 325/400
FEPA: D251 - D46
Work-piece Materials
Glass, Granite, Marble, Limestone, Dental Ceramics, Cast-iron
DEV MB 6500
Synthetic micron diamond powder with high standard in regards to both shape & size distribution. Has extremely efficient metal bond retention & the crystals have strong cubo- octahedral shape with efficient cutting edges.
Applications
Lapping / Polishing
Sizes
Available in all micronized grades.
DEV RS 6100
Uncoated, synthetic diamond for use in resin-bond applications. It's high friability ensures controlled breakdown of crystals. Strong bond retention results from it's irregular shape & rough surface area, allowing continuous cutting action.
Applications
Grinding, Cutting
Sizes
US mesh:60/70 - 325/400
FEPA:D251 - D46
DEV RS 6600
Synthetic micron powder consisting of uniformly semi-blocky shaped crystals, friable, ideally suited for resin-bond application.
Applications
Lapping / Polishing
Sizes
Available in all micronized grades
DEV RS 6600 Premium
Synthetic micron powder consisting of uniformly semi-blocky shaped crystals, friable, ideally suited for resin-bond applications
Applications
Lapping / Polishing
Sizes
Available in all micronized grades